Concrete Patios in Redmond, WA

Seattle Concrete Contractors  |  (206) 566-0528  |  Seattle, WA
(206) 566-0528

Planning a new or replacement concrete patio in Redmond? Here’s what shapes the design, the typical cost ranges, and what to send for a quote.

  • Layout around doors, steps and the yard
  • Sloped and drained away from the house
  • Broom, exposed aggregate, color or stamped
Covered concrete patio beside a stone fireplace
Illustrative photo, not a completed project of ours

Get a patio quote in Redmond

Tell us about the project. We’ll call or email to talk it through.

Name

Concrete Patios for Redmond properties

A good patio starts at the back door: the height of the threshold, how many steps down, which way the yard falls, and where rain off the roof ends up. Get those right and a plain broom-finished slab will last decades. Get them wrong and even the nicest stamped pattern ends up with puddles, moss and cracks.

1970s through 2000s subdivisions, townhomes, and new construction around downtown and Overlake. We work across Education Hill, Grass Lawn, Overlake, Idylwood, Bear Creek, Willows/Rose Hill, Redmond Ridge and downtown.

New patios

A level outdoor room where the lawn or an old deck used to be.

Replacing old slabs

Cracked, sunken or tipped patios that send water toward the house.

Covered patios

Slabs under a roof or pergola, with posts and footings planned in.

Redmond conditions that affect your patio

Yards and access

Subdivision lots usually give decent access for trucks, which helps on driveways and patios. Back yards behind fences may still need a wheelbarrow route or pump.

Rain and drainage

Downspouts and yard drains that empty onto the driveway or patio are a common reason slabs settle and grow moss. We plan where water goes before we pour.

Slope and access

Education Hill and the hills around Overlake and Bear Creek have sloped lots and stepped back yards, which brings retaining walls and steps into many projects.

Details that help us price your patio in Redmond

You don’t need answers to all of these. They’re the questions that shape the design and the price.

Size and shape

Rough measurements or a sketch over a photo.

Door and steps

How far the door threshold is above the ground.

What’s there now

Lawn, old slab, pavers or a deck to remove.

Water

Where downspouts discharge and where the yard stays wet.

Access

Gate width and whether a truck can get near.

Finish and extras

Broom, aggregate, color or stamped; steps, seat walls or a fire pit.

Options to talk through

FinishGood forKeep in mind
BroomEveryday patios on a budgetBest traction; plain look
Exposed aggregateWet, shaded yardsTextured and grippy; hides dirt
Integral colorA warmer look than grayColor runs through the slab
StampedA stone or slate lookReseal every few years; choose slip-resistant sealer

Permits for concrete patios in Redmond

The residential building code used across Washington exempts most ground-level patios, walks and driveways from a building permit, but grading, drainage and work in the street right-of-way can still need permits. Redmond requires a Right-of-Way Use Permit for work that modifies sidewalks and other right-of-way infrastructure. Redmond’s Development Services Center makes the call for your property, and we’ll tell you what we expect before you commit.

Planning a patio in Redmond?

Call to talk it through, or send a few details and photos.

What concrete patios typically cost in the Seattle area

Ballpark numbers help you plan a budget before anyone visits. Use them as a starting point, not a promise.

Patio workTypical range
Broom finish patio$6–$10 per sq ft
Exposed aggregate patio$10–$16 per sq ft
Integral color patio$8–$14 per sq ft
Stamped patio$12–$20 per sq ft
Resurfacing a sound patio$4–$9 per sq ft
Saw-cut and replace broken panels$12–$22 per sq ft

Typical market ranges, not a quote from Seattle Concrete Contractors. These are ranges other Seattle-area concrete contractors publish for this work (Seattle Concrete (seattleconcrete.com) service pages, checked November 2026). Your price depends on size, access, removal, base work, finish and permits, and on conditions at your Redmond property. We give a written quote after we understand the job.

Concrete Patios in Redmond: quick answers

How long does a new patio take?

Most patios take a few days of work: demolition and base, forming and pour, then curing time before furniture goes on it. Weather can stretch that.

What’s the best patio finish for a wet yard?

Exposed aggregate or a broom finish gives the most grip. Stamped looks great but needs a slip-resistant sealer.

Do I need a permit for concrete work in Redmond?

Ground-level patios and walks are often exempt, but retaining walls over 4 ft from the bottom of the footing and anything in the right-of-way, such as sidewalks and driveway aprons, need permits. Redmond’s Development Services Center can confirm for your lot.

Learn more about concrete patios

See the full concrete patios guide, or all concrete services in Redmond.

Tell us about your project

A few photos and rough measurements are enough to start. If you’re not sure what the job needs, describe the problem and we’ll talk it through.

Call (206) 566-0528 or use the quote form at the top of this page.

Find us on Google Maps

Seattle Concrete Contractors  |  (206) 566-0528  |  Seattle, WA