Stamped Concrete in Redmond, WA
Seattle ConcreteCONTRACTORS
(206) 566-0528
Thinking about a stamped patio, walk or driveway border in Redmond? Here’s what to decide, what it typically costs, and what to send us.
- Pattern, color and border planned with you
- Base, drainage and joints set for wet winters
- Sealer schedule explained up front
Get a stamped concrete quote in Redmond
Tell us about the project. We’ll call or email to talk it through.
Stamped Concrete for Redmond properties
Stamped concrete is a normal reinforced slab that gets color and texture while it’s still workable. Mats pressed into the surface leave the pattern, and a release agent and hand detailing add the variation that makes it read as stone or brick instead of plain gray concrete. Because it’s one slab, there are no joints for weeds and no individual pavers to settle.
1970s through 2000s subdivisions, townhomes, and new construction around downtown and Overlake. We work across Education Hill, Grass Lawn, Overlake, Idylwood, Bear Creek, Willows/Rose Hill, Redmond Ridge and downtown.
Patios
The most common use. Room for detailed patterns and borders, and easy to tie into steps or a seat wall.
Walkways and entries
A front walk or entry landing with a border that suits the house. Texture matters because walks stay wet.
Driveways
Possible, with a thicker slab and a simpler pattern that’s easier to reseal. Often used as a border or apron accent.
Redmond conditions that affect your stamped concrete
Yards and access
Subdivision lots usually give decent access for trucks, which helps on driveways and patios. Back yards behind fences may still need a wheelbarrow route or pump.
Rain and drainage
Downspouts and yard drains that empty onto the driveway or patio are a common reason slabs settle and grow moss. We plan where water goes before we pour.
Homes and existing concrete
1970s through 2000s subdivisions, townhomes, and new construction around downtown and Overlake.
Details that help us price your stamped concrete in Redmond
You don’t need answers to all of these. They’re the questions that shape the design and the price.
Where it goes
Patio, walk, driveway border or pool surround, and rough size.
Existing surface
Lawn, old concrete, pavers or decking to remove.
Sun or shade
Shade means moss and slower drying, which changes sealer and texture choice.
Pattern ideas
Photos of patterns or colors you like, or the house siding and trim to match.
Steps or walls
Any steps, seat walls or edges that tie in.
Use
Bare feet, dogs, cars or furniture all affect texture and sealer.
Options to talk through
| Choice | What to think about |
|---|---|
| Pattern scale | Bigger stones suit big patios; smaller patterns suit walks and borders |
| Texture depth | Deeper texture grips better when wet but is harder to sweep |
| Color | Look at samples outdoors in our flat gray light, not on a screen |
| Border | A plain or contrasting band frames the field and hides edge work |
| Sealer | Glossy looks rich but gets slick; matte or grit-added sealer is safer on steps and walks |
Permits for stamped concrete in Redmond
The residential building code used across Washington exempts most ground-level patios, walks and driveways from a building permit, but grading, drainage and work in the street right-of-way can still need permits. Redmond requires a Right-of-Way Use Permit for work that modifies sidewalks and other right-of-way infrastructure. Redmond’s Development Services Center makes the call for your property, and we’ll tell you what we expect before you commit.
Thinking about stamped concrete in Redmond?
Call to talk it through, or send a few details and photos.
What stamped concrete typically costs in the Seattle area
Ballpark numbers help you plan a budget before anyone visits. Use them as a starting point, not a promise.
| Finish | Typical installed range |
|---|---|
| Single-color stamped | $12–$16 per sq ft |
| Multi-color stamped | $16–$22 per sq ft |
| Exposed aggregate (for comparison) | $10–$14 per sq ft |
| Broom finish (for comparison) | $6–$10 per sq ft |
Typical market ranges, not a quote from Seattle Concrete Contractors. These are ranges other Seattle-area concrete contractors publish for this work (Seattle Concrete (seattleconcrete.com) service pages, checked November 2026). Your price depends on size, access, removal, base work, finish and permits, and on conditions at your Redmond property. We give a written quote after we understand the job.
Stamped Concrete in Redmond: quick answers
Does stamped concrete hold up in Redmond rain?
Yes, when the base drains, the slab is reinforced and the surface stays sealed. Most problems come from water under the slab or a sealer that wore off years ago.
Is stamped concrete slippery when wet?
It can be, especially with a glossy sealer in shade. A textured pattern and a sealer with anti-slip grit help, and we recommend both for walks, steps and pool areas.
How often does it need resealing?
Every few years for most patios. Full sun, car traffic and pool chemicals shorten that. Faded color or water soaking in instead of beading are signs it’s time.
Do I need a permit for concrete work in Redmond?
Ground-level patios and walks are often exempt, but retaining walls over 4 ft from the bottom of the footing and anything in the right-of-way, such as sidewalks and driveway aprons, need permits. Redmond’s Development Services Center can confirm for your lot.
Learn more about stamped concrete
See the full stamped concrete guide, or all concrete services in Redmond.
More concrete services in Redmond
Stamped Concrete: other areas we serve
Tell us about your project
A few photos and rough measurements are enough to start. If you’re not sure what the job needs, describe the problem and we’ll talk it through.
Call (206) 566-0528 or use the quote form at the top of this page.
Find us on Google Maps
Seattle Concrete Contractors | (206) 566-0528 | Seattle, WA