Concrete Patios in Bellevue, WA

Seattle Concrete Contractors  |  (206) 566-0528  |  Seattle, WA
(206) 566-0528

Planning a new or replacement concrete patio in Bellevue? Here’s what shapes the design, the typical cost ranges, and what to send for a quote.

  • Layout around doors, steps and the yard
  • Sloped and drained away from the house
  • Broom, exposed aggregate, color or stamped
Round patio with a fire pit and chairs
Illustrative photo, not a completed project of ours

Get a patio quote in Bellevue

Tell us about the project. We’ll call or email to talk it through.

Name

Concrete Patios for Bellevue properties

A good patio starts at the back door: the height of the threshold, how many steps down, which way the yard falls, and where rain off the roof ends up. Get those right and a plain broom-finished slab will last decades. Get them wrong and even the nicest stamped pattern ends up with puddles, moss and cracks.

Ranch houses, split-levels, and large new homes on rebuilt lots. Rebuilds often need new driveways, walks, and patios all at once. We work across West Bellevue, Somerset, Newport Hills, Factoria, Lake Hills, Crossroads, Bridle Trails, Woodridge and Eastgate.

New patios

A level outdoor room where the lawn or an old deck used to be.

Replacing old slabs

Cracked, sunken or tipped patios that send water toward the house.

Covered patios

Slabs under a roof or pergola, with posts and footings planned in.

Bellevue conditions that affect your patio

Yards and access

Lots are often larger than in Seattle, which leaves room for bigger patios and better truck access, but long driveways and slopes still mean careful planning for drainage.

Rain and drainage

Rain off big roofs and long driveways has to go somewhere. Trench drains at the garage and sloping walks away from the house are common asks.

Slope and access

Somerset, Newport Hills, Cougar Mountain and the slopes facing Lake Washington and Lake Sammamish have steep drives and terraced yards. The City maps steep slopes and other critical areas, and work on or near them gets extra review.

Details that help us price your patio in Bellevue

You don’t need answers to all of these. They’re the questions that shape the design and the price.

Size and shape

Rough measurements or a sketch over a photo.

Door and steps

How far the door threshold is above the ground.

What’s there now

Lawn, old slab, pavers or a deck to remove.

Water

Where downspouts discharge and where the yard stays wet.

Access

Gate width and whether a truck can get near.

Finish and extras

Broom, aggregate, color or stamped; steps, seat walls or a fire pit.

Options to talk through

FinishGood forKeep in mind
BroomEveryday patios on a budgetBest traction; plain look
Exposed aggregateWet, shaded yardsTextured and grippy; hides dirt
Integral colorA warmer look than grayColor runs through the slab
StampedA stone or slate lookReseal every few years; choose slip-resistant sealer

Permits for concrete patios in Bellevue

The residential building code used across Washington exempts most ground-level patios, walks and driveways from a building permit, but grading, drainage and work in the street right-of-way can still need permits. Bellevue Development Services makes the call for your property, and we’ll tell you what we expect before you commit.

Planning a patio in Bellevue?

Call to talk it through, or send a few details and photos.

What concrete patios typically cost in the Seattle area

Ballpark numbers help you plan a budget before anyone visits. Use them as a starting point, not a promise.

Patio workTypical range
Broom finish patio$6–$10 per sq ft
Exposed aggregate patio$10–$16 per sq ft
Integral color patio$8–$14 per sq ft
Stamped patio$12–$20 per sq ft
Resurfacing a sound patio$4–$9 per sq ft
Saw-cut and replace broken panels$12–$22 per sq ft

Typical market ranges, not a quote from Seattle Concrete Contractors. These are ranges other Seattle-area concrete contractors publish for this work (Seattle Concrete (seattleconcrete.com) service pages, checked November 2026). Your price depends on size, access, removal, base work, finish and permits, and on conditions at your Bellevue property. We give a written quote after we understand the job.

Concrete Patios in Bellevue: quick answers

How long does a new patio take?

Most patios take a few days of work: demolition and base, forming and pour, then curing time before furniture goes on it. Weather can stretch that.

What’s the best patio finish for a wet yard?

Exposed aggregate or a broom finish gives the most grip. Stamped looks great but needs a slip-resistant sealer.

Do I need a permit for concrete work in Bellevue?

Many like-for-like patios and walks don’t, but retaining walls over 4 ft from the bottom of the footing, work on steep slopes or other critical areas, and anything in the street right-of-way usually do. Bellevue Development Services decides for your address.

Learn more about concrete patios

See the full concrete patios guide, or all concrete services in Bellevue.

Tell us about your project

A few photos and rough measurements are enough to start. If you’re not sure what the job needs, describe the problem and we’ll talk it through.

Call (206) 566-0528 or use the quote form at the top of this page.

Find us on Google Maps

Seattle Concrete Contractors  |  (206) 566-0528  |  Seattle, WA