Concrete Pool Decks in Bellevue, WA
Seattle ConcreteCONTRACTORS
(206) 566-0528
Planning a new or replacement concrete pool deck in Bellevue? Here’s what keeps it safe and dry, typical cost ranges, and what we need to quote it.
- Slip-resistant texture and sealer
- Deck sloped away from the pool
- Coping and expansion joints planned in
Get a pool deck quote in Bellevue
Tell us about the project. We’ll call or email to talk it through.
Concrete Pool Decks for Bellevue properties
A pool deck has two jobs: grip under wet bare feet, and move water away from the pool. In the Seattle area there’s an extra one: dry out between rains so moss and algae don’t take over. Finish texture, slope and drains decide how a deck performs far more than the pattern you pick.
Ranch houses, split-levels, and large new homes on rebuilt lots. Rebuilds often need new driveways, walks, and patios all at once. We work across West Bellevue, Somerset, Newport Hills, Factoria, Lake Hills, Crossroads, Bridle Trails, Woodridge and Eastgate.
New pool surrounds
Decks around new pools, poured after the shell and coping are set.
Replacing old decks
Cracked, heaved or slippery decks around existing pools.
Hot tub pads
Level, reinforced pads for spas and hot tubs.
Bellevue conditions that affect your pool deck
Yards and access
Lots are often larger than in Seattle, which leaves room for bigger patios and better truck access, but long driveways and slopes still mean careful planning for drainage.
Rain and drainage
Rain off big roofs and long driveways has to go somewhere. Trench drains at the garage and sloping walks away from the house are common asks.
Tree roots
Large conifers and maples are common in older neighborhoods. Their roots crack and lift driveways and walks, and tree rules can limit how much root can be cut.
Details that help us price your pool deck in Bellevue
You don’t need answers to all of these. They’re the questions that shape the design and the price.
Pool type
In-ground, existing or new, and the coping material.
Deck size
Rough square footage or a sketch.
Existing deck
Photos of cracks, heaves and where water sits.
Shade
Trees and shade affect moss and drying.
Finish
Broom, aggregate, stamped or a coating.
Access
Gate width and route to the back yard.
Options to talk through
| Finish | Good for | Keep in mind |
|---|---|---|
| Broom | Budget decks with good grip | Plain look; reliable traction |
| Exposed aggregate | Wet climates and lots of foot traffic | Grippy; can feel rough on bare feet if coarse |
| Stamped | A stone look around the water | Needs grit-additive sealer |
| Textured coatings | Cooler, softer surface on sound concrete | Depends on the product and upkeep |
Permits for concrete pool decks in Bellevue
The residential building code used across Washington exempts most ground-level patios, walks and driveways from a building permit, but grading, drainage and work in the street right-of-way can still need permits. Bellevue Development Services makes the call for your property, and we’ll tell you what we expect before you commit.
Planning a pool deck in Bellevue?
Call to talk it through, or send a few details and photos.
What concrete pool decks typically cost in the Seattle area
Ballpark numbers help you plan a budget before anyone visits. Use them as a starting point, not a promise.
| Pool deck | Typical installed range |
|---|---|
| Concrete pool deck, by finish | $14–$28 per sq ft |
| Exposed aggregate or stamped | $20–$30+ per sq ft |
| Decks with drainage, curves, coping and decorative work | $18–$35+ per sq ft |
Typical market ranges, not a quote from Seattle Concrete Contractors. These are ranges other Seattle-area concrete contractors publish for this work (Cloud Concrete Seattle (2026 pool deck cost guide) and Bellevue Concrete Contractors FAQ, checked November 2026). Your price depends on size, access, removal, base work, finish and permits, and on conditions at your Bellevue property. We give a written quote after we understand the job.
Concrete Pool Decks in Bellevue: quick answers
What’s the best pool deck finish for a rainy climate?
Broom or exposed aggregate with a non-slick sealer. Stamped works with a grit additive in the sealer.
How much does a concrete pool deck cost?
Other Seattle-area contractors publish about $14–$28 per sq ft depending on finish, and $18–$35+ for complex decks with drainage, curves and coping.
Can my old pool deck be resurfaced?
If it’s sound and not heaving, an overlay or coating may work. Cracked, sunken decks usually need replacement.
Do I need a permit for concrete work in Bellevue?
Many like-for-like patios and walks don’t, but retaining walls over 4 ft from the bottom of the footing, work on steep slopes or other critical areas, and anything in the street right-of-way usually do. Bellevue Development Services decides for your address.
Learn more about concrete pool decks
See the full concrete pool decks guide, or all concrete services in Bellevue.
More concrete services in Bellevue
Tell us about your project
A few photos and rough measurements are enough to start. If you’re not sure what the job needs, describe the problem and we’ll talk it through.
Call (206) 566-0528 or use the quote form at the top of this page.
Find us on Google Maps
Seattle Concrete Contractors | (206) 566-0528 | Seattle, WA