Concrete Slabs in Redmond, WA
Seattle ConcreteCONTRACTORS
(206) 566-0528
Need a garage, shed, ADU or hot tub slab in Redmond? Here’s how we size the base and slab, typical prices, and what to send for a quote.
- Base and compaction sized to the load
- Vapor barrier and thickened edges where needed
- Flat or sloped to drain, as the use needs
Get a slab quote in Redmond
Tell us about the project. We’ll call or email to talk it through.
Concrete Slabs for Redmond properties
A slab is the simplest thing we pour and the easiest to get wrong. Flatness, thickness, base and edges change with what sits on it: a hot tub, a car, a shed, or a living space. We start with the use and the soil, then size the slab to match.
1970s through 2000s subdivisions, townhomes, and new construction around downtown and Overlake. We work across Education Hill, Grass Lawn, Overlake, Idylwood, Bear Creek, Willows/Rose Hill, Redmond Ridge and downtown.
Garage slabs
Thickened edges, reinforcement and a slope toward the door.
Shed and studio pads
Level pads sized for the building.
ADU and cottage slabs
Slab-on-grade foundations poured to plan.
Redmond conditions that affect your slab
Soil and settling
The Sammamish valley floor has softer river soils and a higher water table than the surrounding hills. Valley-floor slabs need extra attention to base depth and drainage.
Yards and access
Subdivision lots usually give decent access for trucks, which helps on driveways and patios. Back yards behind fences may still need a wheelbarrow route or pump.
Rain and drainage
Downspouts and yard drains that empty onto the driveway or patio are a common reason slabs settle and grow moss. We plan where water goes before we pour.
Details that help us price your slab in Redmond
You don’t need answers to all of these. They’re the questions that shape the design and the price.
Use
Garage, shed, ADU, hot tub or equipment.
Size
Length, width and any plans.
Site
Photos of the area, slope and access.
Existing
An old slab, pavers or lawn to remove.
Permit
Is it part of a permitted building?
Timing
When the building or tub arrives.
Options to talk through
| Slab | Typical use | Keep in mind |
|---|---|---|
| Utility / shed slab | Sheds, bins, equipment | Simple base and broom finish |
| Garage slab (monolithic) | Garages and carports | Thickened edges, rebar grid, vapor barrier |
| Slab-on-grade foundation | ADUs and additions | Built to plans and inspected |
| Hot tub pad | Spas | Flat and reinforced for heavy point loads |
Permits for concrete slabs in Redmond
Foundations and slabs for additions, garages, ADUs and other buildings are part of the building permit, with inspections of footings and steel before the pour. Redmond’s Development Services Center makes the call for your property, and we’ll tell you what we expect before you commit.
Planning a new slab in Redmond?
Call to talk it through, or send a few details and photos.
What concrete slabs typically cost in the Seattle area
Ballpark numbers help you plan a budget before anyone visits. Use them as a starting point, not a promise.
| Slab | Typical range |
|---|---|
| Basic utility or shed slab | from about $5 per sq ft |
| Garage slab (monolithic) | from about $7 per sq ft |
| Slab-on-grade with base, vapor barrier and rebar | $6–$14 per sq ft |
Typical market ranges, not a quote from Seattle Concrete Contractors. These are ranges other Seattle-area concrete contractors publish for this work (Seattle-WA-Concrete and Seattle Concrete (seattleconcrete.com) published price guides, checked November 2026). Your price depends on size, access, removal, base work, finish and permits, and on conditions at your Redmond property. We give a written quote after we understand the job.
Concrete Slabs in Redmond: quick answers
How thick should a slab be?
It depends on the use: shed pads are thinner than garage floors, and structural slabs follow the plans.
Do I need a permit for a slab?
Slabs for garages, ADUs and enclosed buildings are part of a building permit. Simple pads and patios often aren’t.
Do I need a vapor barrier?
Under anything enclosed, yes. Outdoors, it depends.
Do I need a permit for concrete work in Redmond?
Ground-level patios and walks are often exempt, but retaining walls over 4 ft from the bottom of the footing and anything in the right-of-way, such as sidewalks and driveway aprons, need permits. Redmond’s Development Services Center can confirm for your lot.
Learn more about concrete slabs
See the full concrete slabs guide, or all concrete services in Redmond.
More concrete services in Redmond
Tell us about your project
A few photos and rough measurements are enough to start. If you’re not sure what the job needs, describe the problem and we’ll talk it through.
Call (206) 566-0528 or use the quote form at the top of this page.
Find us on Google Maps
Seattle Concrete Contractors | (206) 566-0528 | Seattle, WA