Stamped Concrete in Seattle: Planning Your Quote
Seattle ConcreteCONTRACTORS
(206) 566-0528
Thinking about a stamped patio, walk or driveway border in Seattle? Here’s what to decide, what it typically costs, and what to send us.
- Pattern, color and border planned with you
- Base, drainage and joints set for wet winters
- Sealer schedule explained up front
Get a stamped concrete quote in Seattle
Tell us about the project. We’ll call or email to talk it through.
Stamped Concrete for Seattle properties
Stamped concrete is a normal reinforced slab that gets color and texture while it’s still workable. Mats pressed into the surface leave the pattern, and a release agent and hand detailing add the variation that makes it read as stone or brick instead of plain gray concrete. Because it’s one slab, there are no joints for weeds and no individual pavers to settle.
Craftsman bungalows, Tudors, and mid-century houses with original concrete are common, alongside new townhomes and backyard cottages (DADUs) that need new slabs and walks. We work across Ballard, Wallingford, Queen Anne, Magnolia, Capitol Hill, Beacon Hill, West Seattle, Rainier Valley, Lake City and Northgate.
Patios
The most common use. Room for detailed patterns and borders, and easy to tie into steps or a seat wall.
Walkways and entries
A front walk or entry landing with a border that suits the house. Texture matters because walks stay wet.
Driveways
Possible, with a thicker slab and a simpler pattern that’s easier to reseal. Often used as a border or apron accent.
Seattle conditions that affect your stamped concrete
Yards and access
Back yards are often small, shaded, and reached through a narrow side yard or alley. Concrete sometimes has to be pumped or wheeled in, which affects the schedule and the price.
Rain and drainage
Long rainy seasons mean water management decides how long concrete lasts: slope away from the house, joints that drain, and somewhere for downspout water to go.
Homes and existing concrete
Craftsman bungalows, Tudors, and mid-century houses with original concrete are common, alongside new townhomes and backyard cottages (DADUs) that need new slabs and walks.
Details that help us price your stamped concrete in Seattle
You don’t need answers to all of these. They’re the questions that shape the design and the price.
Where it goes
Patio, walk, driveway border or pool surround, and rough size.
Existing surface
Lawn, old concrete, pavers or decking to remove.
Sun or shade
Shade means moss and slower drying, which changes sealer and texture choice.
Pattern ideas
Photos of patterns or colors you like, or the house siding and trim to match.
Steps or walls
Any steps, seat walls or edges that tie in.
Use
Bare feet, dogs, cars or furniture all affect texture and sealer.
Options to talk through
| Choice | What to think about |
|---|---|
| Pattern scale | Bigger stones suit big patios; smaller patterns suit walks and borders |
| Texture depth | Deeper texture grips better when wet but is harder to sweep |
| Color | Look at samples outdoors in our flat gray light, not on a screen |
| Border | A plain or contrasting band frames the field and hides edge work |
| Sealer | Glossy looks rich but gets slick; matte or grit-added sealer is safer on steps and walks |
Permits for stamped concrete in Seattle
In Seattle, adding or replacing 750 sq ft or more of paving generally needs an SDCI grading permit. Smaller patios and walks often don’t. Anything in the sidewalk, planting strip, curb or driveway apron is right-of-way work that needs an SDOT permit. Check SDCI’s permit guide for your address.
Thinking about stamped concrete in Seattle?
Call to talk it through, or send a few details and photos.
What stamped concrete typically costs in the Seattle area
Ballpark numbers help you plan a budget before anyone visits. Use them as a starting point, not a promise.
| Finish | Typical installed range |
|---|---|
| Single-color stamped | $12–$16 per sq ft |
| Multi-color stamped | $16–$22 per sq ft |
| Exposed aggregate (for comparison) | $10–$14 per sq ft |
| Broom finish (for comparison) | $6–$10 per sq ft |
Typical market ranges, not a quote from Seattle Concrete Contractors. These are ranges other Seattle-area concrete contractors publish for this work (Seattle Concrete (seattleconcrete.com) service pages, checked November 2026). Your price depends on size, access, removal, base work, finish and permits, and on conditions at your Seattle property. We give a written quote after we understand the job.
Stamped Concrete in Seattle: quick answers
Does stamped concrete hold up in Seattle rain?
Yes, when the base drains, the slab is reinforced and the surface stays sealed. Most problems come from water under the slab or a sealer that wore off years ago.
Is stamped concrete slippery when wet?
It can be, especially with a glossy sealer in shade. A textured pattern and a sealer with anti-slip grit help, and we recommend both for walks, steps and pool areas.
How often does it need resealing?
Every few years for most patios. Full sun, car traffic and pool chemicals shorten that. Faded color or water soaking in instead of beading are signs it’s time.
Do I need a permit for concrete work in Seattle?
It depends on the job. SDCI generally requires a grading permit when you add or replace 750 sq ft or more of paving, and walls taller than 4 ft measured from the bottom of the footing need a permit. Anything in the sidewalk, planting strip or driveway apron is right-of-way work that goes through SDOT.
Learn more about stamped concrete
See the full stamped concrete guide, or all concrete services in Seattle.
More concrete services in Seattle
Stamped Concrete: other areas we serve
Tell us about your project
A few photos and rough measurements are enough to start. If you’re not sure what the job needs, describe the problem and we’ll talk it through.
Call (206) 566-0528 or use the quote form at the top of this page.
Find us on Google Maps
Seattle Concrete Contractors | (206) 566-0528 | Seattle, WA