Concrete Foundations in Tacoma, WA

Seattle Concrete Contractors  |  (206) 566-0528  |  Seattle, WA
(206) 566-0528

Need footings, stem walls or a slab foundation in Tacoma? Here’s how foundation work runs, what affects the price, and what we need to quote it.

  • Built to stamped plans and inspections
  • Footings sized for the soil you actually have
  • Drainage and vapor barrier planned in
Concrete footing forms and rebar on a prepared site
Illustrative photo, not a completed project of ours

Get a foundation quote in Tacoma

Tell us about the project. We’ll call or email to talk it through.

Name

Concrete Foundations for Tacoma properties

Foundation work is concrete where the drawings and the inspector set the rules. For an addition, a detached garage, a backyard cottage (DADU) or a large shed, the plans say how deep the footings go, how much steel goes in, and where anchor bolts and hold-downs sit. Our job is to dig, form, place steel and pour exactly to that plan, and to flag soil or water problems before the concrete goes in.

Early 1900s houses in the North End and Hilltop, mid-century homes across the city, and newer infill. We work across the North End, Proctor, Stadium District, Hilltop, Central Tacoma, South Tacoma, the Eastside, Northeast Tacoma and Point Defiance.

Additions

Footings and stem walls that tie into an existing house foundation.

Garages and carports

Slab-on-grade with thickened edges, or footings and stem walls.

Backyard cottages (DADUs)

Foundations and slabs for detached accessory units.

Tacoma conditions that affect your foundation

Soil and settling

Soils vary across the city; low and filled areas near the tideflats and gulches are softer than the ridges. A soils question is worth asking on any slab that has settled before.

Slope and access

The North End, Stadium District and Northeast Tacoma have steep streets and hillside lots, while South Tacoma is flatter. Slope decides how much of a project is walls and steps versus flatwork.

Homes and existing concrete

Early 1900s houses in the North End and Hilltop, mid-century homes across the city, and newer infill.

Details that help us price your foundation in Tacoma

You don’t need answers to all of these. They’re the questions that shape the design and the price.

Plans

Approved or draft drawings, plus any soils report.

Structure

Addition, garage, ADU, shed or deck.

Site

Photos of the area, slope, trees and access.

Permit status

Applied for, approved or not started.

Schedule

When framing needs to start.

Existing foundation

For additions, photos of the existing foundation where the new one ties in.

Options to talk through

TypeGood forKeep in mind
Slab-on-gradeGarages, sheds, some ADUsNeeds a solid base, vapor barrier and thickened edges
Continuous footing + stem wallAdditions and wood-frame houses with a crawlspaceTwo-stage pour; matches many older Seattle homes
Pier footingsDecks, porches and postsSized and spaced per plan

Permits for concrete foundations in Tacoma

Foundations and slabs for additions, garages, ADUs and other buildings are part of the building permit, with inspections of footings and steel before the pour. Tacoma Planning & Development Services makes the call for your property, and we’ll tell you what we expect before you commit.

Planning a new foundation in Tacoma?

Call to talk it through, or send a few details and photos.

What concrete foundations typically cost in the Seattle area

Ballpark numbers help you plan a budget before anyone visits. Use them as a starting point, not a promise.

Foundation workTypical range
Slab-on-grade (base, vapor barrier, rebar, pour)$6–$14 per sq ft
Continuous footing$40–$90 per linear ft
Stem wall + footing$80–$150 per linear ft
Foundation repair or underpinning$5,000–$20,000+ per project

Typical market ranges, not a quote from Seattle Concrete Contractors. These are ranges other Seattle-area concrete contractors publish for this work (Seattle Concrete (seattleconcrete.com) service pages, checked November 2026). Your price depends on size, access, removal, base work, finish and permits, and on conditions at your Tacoma property. We give a written quote after we understand the job.

Concrete Foundations in Tacoma: quick answers

Do you work from engineered plans?

Yes. Foundations are built to the approved plans and inspected. If you don’t have plans yet, your designer or engineer comes first.

How long does a foundation take?

Excavation, forming and steel take most of the time; inspection timing and cure time set the rest. Small jobs can be a week or two.

Do I need a permit for concrete work in Tacoma?

Patios and walks on private property often don’t need a building permit, but retaining walls over 4 ft from the bottom of the footing and work in the right-of-way do. Tacoma Planning & Development Services has the final word.

Learn more about concrete foundations

See the full concrete foundations guide, or all concrete services in Tacoma.

Tell us about your project

A few photos and rough measurements are enough to start. If you’re not sure what the job needs, describe the problem and we’ll talk it through.

Call (206) 566-0528 or use the quote form at the top of this page.

Find us on Google Maps

Seattle Concrete Contractors  |  (206) 566-0528  |  Seattle, WA