Concrete Pool Decks in Seattle
Seattle ConcreteCONTRACTORS
(206) 566-0528
New and replacement concrete pool decks and surrounds with slip-resistant finishes and drainage that keeps water off the deck and away from the pool shell.
- Slip-resistant texture and sealer
- Deck sloped away from the pool
- Coping and expansion joints planned in
Get a pool deck quote
Tell us about the project. We’ll call or email to talk it through.
What to know about concrete pool decks in Seattle
A pool deck has two jobs: grip under wet bare feet, and move water away from the pool. In the Seattle area there’s an extra one: dry out between rains so moss and algae don’t take over. Finish texture, slope and drains decide how a deck performs far more than the pattern you pick.
New pool surrounds
Decks around new pools, poured after the shell and coping are set.
Replacing old decks
Cracked, heaved or slippery decks around existing pools.
Hot tub pads
Level, reinforced pads for spas and hot tubs.
Resurfacing
Overlays on sound decks to refresh the surface.
Paths and lounging areas
Walks from the house and room for chairs.
Drainage fixes
Adding slope and drains where water sits.
Options to talk through
| Finish | Good for | Keep in mind |
|---|---|---|
| Broom | Budget decks with good grip | Plain look; reliable traction |
| Exposed aggregate | Wet climates and lots of foot traffic | Grippy; can feel rough on bare feet if coarse |
| Stamped | A stone look around the water | Needs grit-additive sealer |
| Textured coatings | Cooler, softer surface on sound concrete | Depends on the product and upkeep |
How Seattle’s ground and weather affect concrete pool decks
Slope
Decks slope away from the pool edge so splash water doesn’t run back in or under the coping.
Drains
Channel or area drains carry water off the deck; important in our long wet season.
Moss and algae
Shaded decks stay damp. Sealers and cleaning schedules keep them from getting slick.
Freeze-thaw
Water that sits on a deck can damage the surface when it freezes. Drainage and sealing help.
Expansion joints
Joints separate the deck from the coping and walls so movement doesn’t crack either.
Pool barrier rules
Fences and gates around pools have their own requirements; plan them with the deck.
Planning a pool deck in Seattle?
Call to talk it through, or send a few details and photos.
How the job runs
- PlanLayout, slope, drains, coping and finish.
- Demo and baseRemove old deck; compact gravel base.
- Pour and finishSteel, pour, texture for grip, cut joints.
- Cure and sealCure, then a slip-resistant sealer.
What concrete pool decks typically cost in the Seattle area
Ballpark numbers help you plan a budget before anyone visits. Use them as a starting point, not a promise.
| Pool deck | Typical installed range |
|---|---|
| Concrete pool deck, by finish | $14–$28 per sq ft |
| Exposed aggregate or stamped | $20–$30+ per sq ft |
| Decks with drainage, curves, coping and decorative work | $18–$35+ per sq ft |
Typical market ranges, not a quote from Seattle Concrete Contractors. These are ranges other Seattle-area concrete contractors publish for this work (Cloud Concrete Seattle (2026 pool deck cost guide) and Bellevue Concrete Contractors FAQ, checked November 2026). Your price depends on size, access, removal, base work, finish and permits. We give a written quote after we understand the job.
What affects the price
These are the things that move a quote most, in roughly the order they matter.
Finish
Stamped and aggregate cost more than broom.
Drainage
Channel drains and slope corrections add cost.
Coping
Coping work and joints at the pool edge.
Demolition
Removing an old deck near the pool takes care.
Access
Pumping into back yards.
Shape
Curves and free-form pools take more forming.
What a good written quote should include
Whoever you hire, ask for these in writing. They’re what separate a slab that lasts from one that cracks in two winters.
Scope and size
The area, thickness and shape, so you can compare quotes on the same job.
Base and drainage
How deep the excavation goes, how much gravel, and where water goes.
Reinforcement and joints
Rebar or mesh, dowels into existing concrete, and joint spacing.
Finish and sealing
The finish, whether it’s sealed, and what upkeep to expect.
Removal and cleanup
Demolition, haul-away and site restoration.
Permits and schedule
Which permits apply, who pulls them, and cure time before use.
Concrete Pool Decks: common questions
What’s the best pool deck finish for a rainy climate?
Broom or exposed aggregate with a non-slick sealer. Stamped works with a grit additive in the sealer.
How much does a concrete pool deck cost?
Other Seattle-area contractors publish about $14–$28 per sq ft depending on finish, and $18–$35+ for complex decks with drainage, curves and coping.
Can my old pool deck be resurfaced?
If it’s sound and not heaving, an overlay or coating may work. Cracked, sunken decks usually need replacement.
How do you keep water off the deck?
Slope away from the pool and drains where the slope can’t carry water off the deck.
Can you work around existing coping?
Often, with care and expansion joints. Damaged coping may be best replaced at the same time.
How soon can we use the deck?
Light foot traffic after a few days; wait for the sealer and full cure before heavy furniture.
Other areas we serve
Concrete Pool Decks planning notes, permits and local conditions for each city we cover.
Pool decks in BellevuePhotos are illustrative, not completed projects of ours.
Stamped Concrete
Concrete Patios
Concrete Repair & Leveling
Concrete SlabsTell us about your project
A few photos and rough measurements are enough to start. If you’re not sure what the job needs, describe the problem and we’ll talk it through.
Call (206) 566-0528 or use the quote form at the top of this page.
Find us on Google Maps
Seattle Concrete Contractors | (206) 566-0528 | Seattle, WA