Concrete Steps and Stairs in Seattle
Front entry steps, landings, porch stairs and garden steps on Seattle’s slopes, with even risers and finishes that grip in the rain.
- Even rise and run, sized to the door
- Landings and railing posts planned in
- Broom or textured finish for wet days

Get a quote for concrete steps
Tell us about the project. We’ll call or email to talk it through.
What to know about concrete steps and stairs in Seattle
Old concrete steps fail in predictable ways: they settle and pull away from the house, the risers are uneven, the treads tip toward the door, or the edges spall from years of water and freezing. New steps are a chance to fix the geometry as well as the concrete, so the steps are comfortable, safe and shed water.
Front entry steps
Replacing tired steps and landings at the front door.
Porch and back-door steps
Short runs down to a patio or yard.
Garden stairs
Steps cut into a slope, often with walls on the sides.
Steps with landings
Longer runs broken up with landings.
Steps in retaining walls
Stairs built into a wall system.
Repair
Patching chipped edges and resurfacing sound steps where that’s realistic.
Options to talk through
| Choice | What to think about |
|---|---|
| Rise and run | Even risers and deep enough treads; inconsistent steps cause trips |
| Landing | Room to stand and open the door without stepping back |
| Railings | Plan post locations before the pour |
| Finish | Broom or exposed aggregate for grip; stamped needs grit in the sealer |
| Nosing | Rounded edges resist chipping |
How Seattle’s ground and weather affect concrete steps and stairs
Hills
Seattle’s slopes mean long stair runs from street to front door. Landings break up long runs.
Moss and rain
Shaded steps get slick. A broom or textured finish and good drainage off each tread help.
Settling
Old steps often sit on little or no footing. New steps get a footing or are tied to the foundation as the plan calls for.
Code basics
Exterior stairs follow the residential code for riser height, tread depth and railings. Your project’s permit status decides who inspects.
Right-of-way
Steps from the public sidewalk up to your yard can involve right-of-way rules where they meet the sidewalk.
Older houses
Historic houses may have odd door heights; we design the steps around what’s there.
Planning new concrete steps in Seattle?
Call to talk it through, or send a few details and photos.
How the job runs
- MeasureTotal rise, run, door height and landing size.
- DemoBreak out old steps and prepare the footing.
- FormBuild forms and set steel, including railing post sleeves.
- Pour and finishPour, finish treads for grip, cure.
What concrete steps and stairs typically cost in the Seattle area
Ballpark numbers help you plan a budget before anyone visits. Use them as a starting point, not a promise.
| Steps | Typical range |
|---|---|
| Front entry, 3–5 steps with landing | $2,500–$5,500 per set |
Typical market ranges, not a quote from Seattle Concrete Contractors. These are ranges other Seattle-area concrete contractors publish for this work (Seattle Concrete (seattleconcrete.com) service pages, checked November 2026). Your price depends on size, access, removal, base work, finish and permits. We give a written quote after we understand the job.
What affects the price
These are the things that move a quote most, in roughly the order they matter.
Number of steps
More risers mean more forming and concrete.
Landing size
Bigger landings add concrete.
Demolition
Removing old steps tied to the house takes care.
Walls and returns
Side walls or planters add forming.
Finish
Aggregate, color or stamped cost more than broom.
Railings
Posts and sleeves are planned in; railings themselves may be separate.
What a good written quote should include
Whoever you hire, ask for these in writing. They’re what separate a slab that lasts from one that cracks in two winters.
Scope and size
The area, thickness and shape, so you can compare quotes on the same job.
Base and drainage
How deep the excavation goes, how much gravel, and where water goes.
Reinforcement and joints
Rebar or mesh, dowels into existing concrete, and joint spacing.
Finish and sealing
The finish, whether it’s sealed, and what upkeep to expect.
Removal and cleanup
Demolition, haul-away and site restoration.
Permits and schedule
Which permits apply, who pulls them, and cure time before use.
Concrete Steps & Stairs: common questions
How much do concrete steps cost?
Other Seattle contractors publish about $2,500–$5,500 for a typical 3–5 step entry with a landing. Your quote depends on size, demolition and finish.
Do I need a permit to replace front steps?
Like-for-like replacement often doesn’t, but new stairs as part of a deck, addition or larger project, or work touching the sidewalk, can. We’ll tell you what applies.
How long until I can use new steps?
Light foot traffic usually after a day or two, with care. Full strength takes weeks.
Can steps be built on a steep slope?
Yes, with landings and sometimes walls. Steep sites need careful layout and drainage.
What’s the safest finish?
Broom or exposed aggregate. Avoid glossy sealers on steps.
Can old steps be resurfaced instead?
If the steps are sound and not settling, maybe. If they’ve pulled away from the house or the risers are uneven, replacement is better.
Other areas we serve
Concrete Steps & Stairs planning notes, permits and local conditions for each city we cover.
Photos are illustrative, not completed projects of ours.
Tell us about your project
A few photos and rough measurements are enough to start. If you’re not sure what the job needs, describe the problem and we’ll talk it through.
Call (206) 566-0528 or use the quote form at the top of this page.
Find us on Google Maps
Seattle Concrete Contractors | (206) 566-0528 | Seattle, WA
Steps & stairs in Bellevue
Retaining Walls
Concrete Patios
Concrete Sidewalks
Concrete Repair & Leveling