Concrete Slabs in Kirkland, WA

Seattle Concrete Contractors  |  (206) 566-0528  |  Seattle, WA
(206) 566-0528

Need a garage, shed, ADU or hot tub slab in Kirkland? Here’s how we size the base and slab, typical prices, and what to send for a quote.

  • Base and compaction sized to the load
  • Vapor barrier and thickened edges where needed
  • Flat or sloped to drain, as the use needs
Concrete footing forms and rebar on a prepared site
Illustrative photo, not a completed project of ours

Get a slab quote in Kirkland

Tell us about the project. We’ll call or email to talk it through.

Name

Concrete Slabs for Kirkland properties

A slab is the simplest thing we pour and the easiest to get wrong. Flatness, thickness, base and edges change with what sits on it: a hot tub, a car, a shed, or a living space. We start with the use and the soil, then size the slab to match.

Original ramblers and split-levels next to new construction and townhomes, especially around Totem Lake and Houghton. We work across Juanita, Finn Hill, Totem Lake, Kingsgate, Rose Hill, Houghton, Lakeview, Moss Bay, Market and Norkirk.

Garage slabs

Thickened edges, reinforcement and a slope toward the door.

Shed and studio pads

Level pads sized for the building.

ADU and cottage slabs

Slab-on-grade foundations poured to plan.

Kirkland conditions that affect your slab

Soil and settling

Glacial soils on the ridges are generally firm, while lower areas near Juanita Bay and creek corridors can be wetter and softer.

Yards and access

Smaller lots near downtown and the lake, larger ones up the hill. Many back yards step down a slope and need walls or steps to be usable.

Rain and drainage

Slopes push water downhill toward patios and foundations. Drains behind walls and along patios matter as much as the concrete itself.

Details that help us price your slab in Kirkland

You don’t need answers to all of these. They’re the questions that shape the design and the price.

Use

Garage, shed, ADU, hot tub or equipment.

Size

Length, width and any plans.

Site

Photos of the area, slope and access.

Existing

An old slab, pavers or lawn to remove.

Permit

Is it part of a permitted building?

Timing

When the building or tub arrives.

Options to talk through

SlabTypical useKeep in mind
Utility / shed slabSheds, bins, equipmentSimple base and broom finish
Garage slab (monolithic)Garages and carportsThickened edges, rebar grid, vapor barrier
Slab-on-grade foundationADUs and additionsBuilt to plans and inspected
Hot tub padSpasFlat and reinforced for heavy point loads

Permits for concrete slabs in Kirkland

Foundations and slabs for additions, garages, ADUs and other buildings are part of the building permit, with inspections of footings and steel before the pour. Kirkland Development Services makes the call for your property, and we’ll tell you what we expect before you commit.

Planning a new slab in Kirkland?

Call to talk it through, or send a few details and photos.

What concrete slabs typically cost in the Seattle area

Ballpark numbers help you plan a budget before anyone visits. Use them as a starting point, not a promise.

SlabTypical range
Basic utility or shed slabfrom about $5 per sq ft
Garage slab (monolithic)from about $7 per sq ft
Slab-on-grade with base, vapor barrier and rebar$6–$14 per sq ft

Typical market ranges, not a quote from Seattle Concrete Contractors. These are ranges other Seattle-area concrete contractors publish for this work (Seattle-WA-Concrete and Seattle Concrete (seattleconcrete.com) published price guides, checked November 2026). Your price depends on size, access, removal, base work, finish and permits, and on conditions at your Kirkland property. We give a written quote after we understand the job.

Concrete Slabs in Kirkland: quick answers

How thick should a slab be?

It depends on the use: shed pads are thinner than garage floors, and structural slabs follow the plans.

Do I need a permit for a slab?

Slabs for garages, ADUs and enclosed buildings are part of a building permit. Simple pads and patios often aren’t.

Do I need a vapor barrier?

Under anything enclosed, yes. Outdoors, it depends.

Do I need a permit for concrete work in Kirkland?

Kirkland lists retaining walls and rockeries over 4 ft tall as needing a permit, and requires a Public Works permit for driveway replacement or any work in the right-of-way. Exemptions don’t apply in steep slope or other critical areas.

Learn more about concrete slabs

See the full concrete slabs guide, or all concrete services in Kirkland.

Tell us about your project

A few photos and rough measurements are enough to start. If you’re not sure what the job needs, describe the problem and we’ll talk it through.

Call (206) 566-0528 or use the quote form at the top of this page.

Find us on Google Maps

Seattle Concrete Contractors  |  (206) 566-0528  |  Seattle, WA