Retaining Walls in Kirkland, WA

Seattle Concrete Contractors  |  (206) 566-0528  |  Seattle, WA
(206) 566-0528

Need a retaining wall in Kirkland? Here’s how we plan walls around slope and water, when permits and engineering apply, and typical cost ranges.

  • Drain rock, pipe and outlet behind every wall
  • Engineering and permits flagged early
  • Steps and patios tied in where needed
Block retaining wall along a lawn
Illustrative photo, not a completed project of ours

Get a retaining wall quote in Kirkland

Tell us about the project. We’ll call or email to talk it through.

Name

Retaining Walls for Kirkland properties

A retaining wall holds back soil and the water in it. Water is the part people underestimate. When the soil behind a wall stays saturated through a Seattle winter, the pressure on it climbs, and walls built without drainage lean, crack and eventually fail. Every wall we plan starts with where the water goes.

Original ramblers and split-levels next to new construction and townhomes, especially around Totem Lake and Houghton. We work across Juanita, Finn Hill, Totem Lake, Kingsgate, Rose Hill, Houghton, Lakeview, Moss Bay, Market and Norkirk.

Level yards

Turning a slope into usable lawn or patio space.

Driveway cuts

Holding back soil beside a driveway or parking pad.

Terraced beds

Lower walls in steps for planting.

Kirkland conditions that affect your retaining wall

Slope and access

Finn Hill, Juanita, Houghton and the bluffs above the lake have steep lots. Kirkland’s permit exemptions don’t apply in steep slope, landslide or other critical areas, so walls and grading there get reviewed.

Soil and settling

Glacial soils on the ridges are generally firm, while lower areas near Juanita Bay and creek corridors can be wetter and softer.

Rain and drainage

Slopes push water downhill toward patios and foundations. Drains behind walls and along patios matter as much as the concrete itself.

Details that help us price your retaining wall in Kirkland

You don’t need answers to all of these. They’re the questions that shape the design and the price.

Height and length

Tallest point and rough length. Height counts from the bottom of the footing.

What’s above

A driveway, house, fence or slope above the wall adds load.

Water

Wet spots, seeps or water running down the slope in winter.

Property line

How close the wall is to a neighbor.

Existing wall

Photos of any old wall, rockery or timbers to remove.

Access

Can equipment get in, or is it hand work?

Options to talk through

TypeGood forKeep in mind
Poured concreteDriveway cuts, taller walls, tight spots near property linesNeeds a footing, forms and cure time; can be smooth or board-formed
Concrete block (CMU)Structural walls with a stone, stucco or painted faceReinforced and grouted on a footing
Segmental blockGarden terraces and lower wallsTaller walls need geogrid back into the slope

Permits for retaining walls in Kirkland

Under the building code used across Washington, retaining walls over 4 ft measured from the bottom of the footing to the top of the wall, or walls holding back a surcharge such as a driveway or slope, generally need a permit and often an engineered design. Kirkland lists rockeries and retaining walls over four feet as permit work, and its exemptions don’t apply in steep slope or other critical areas. Kirkland Development Services makes the call for your property, and we’ll tell you what we expect before you commit.

Planning a retaining wall in Kirkland?

Call to talk it through, or send a few details and photos.

What retaining walls typically cost in the Seattle area

Ballpark numbers help you plan a budget before anyone visits. Use them as a starting point, not a promise.

Wall typeTypical range
Poured concrete, up to 4 ft$80–$150 per linear ft
Poured concrete, 4–8 ft (engineered)$150–$300+ per linear ft
CMU block wall$60–$120 per linear ft
Segmental retaining block$40–$90 per linear ft
Engineering and permit fees (walls over 4 ft)add $2,000–$5,000

Typical market ranges, not a quote from Seattle Concrete Contractors. These are ranges other Seattle-area concrete contractors publish for this work (Seattle Concrete (seattleconcrete.com) service pages (another Seattle wall builder lists $30–$100 per sq ft of wall face by type), checked November 2026). Your price depends on size, access, removal, base work, finish and permits, and on conditions at your Kirkland property. We give a written quote after we understand the job.

Retaining Walls in Kirkland: quick answers

Do I need an engineer?

For taller walls, walls with load above them, and walls in critical areas, usually yes. We’ll tell you early.

Why do retaining walls lean?

Usually water pressure behind a wall with no drainage, or a footing that’s too small for the soil.

Do I need a permit for concrete work in Kirkland?

Kirkland lists retaining walls and rockeries over 4 ft tall as needing a permit, and requires a Public Works permit for driveway replacement or any work in the right-of-way. Exemptions don’t apply in steep slope or other critical areas.

Learn more about retaining walls

See the full retaining walls guide, or all concrete services in Kirkland.

Tell us about your project

A few photos and rough measurements are enough to start. If you’re not sure what the job needs, describe the problem and we’ll talk it through.

Call (206) 566-0528 or use the quote form at the top of this page.

Find us on Google Maps

Seattle Concrete Contractors  |  (206) 566-0528  |  Seattle, WA